technical data sheet - draft m9 multimag 6 receptacle M9K703-299L rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 fax : +49 8684 18-499 email : info@rosenberger.de page 1 / 2 rf_35/05.10/6.0 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg all dimensions are in mm; tolerances according to i so 2768 m-h general information magnetic connector number and type of contacts 6 rigid pins soldering solder cup for pre-tinned wire color black, similar ral 9005 interface mating with l99-029-xxx multimag6 cable assembly, black l99-a0039-xxx multimag6 cable assembly, white material and plating connector parts material plating/color contacts brass gold plated housing pbt gf30 black similar ral 9005 magnets ndfeb nickel plated gasket fvmq black
technical data sheet - draft m9 multimag 6 receptacle M9K703-299L rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 fax : +49 8684 18-499 email : info@rosenberger.de page 2 / 2 rf_35/05.10/6.0 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg electrical data electrical data acc. to usb 2.0 specification maximum voltage 5 v maximum current 0.5 a mechanical data mating cycles min. 2.500 magnetic disengagement force average 8 n (force application point on plug) environmental data temperature range -20 c to +60 c magnets start losing their magnetic properties abov e 65 c corrosion (optional) mil-std-202, meth. 101, cond. b (dependent on series) vibration (optional) mil-std-202, meth. 204, cond. d (dependent on series) shock (optional) mil-std-202, meth. 213, cond. i (dependent on series) degree of protection iec 60529, ipx5 rohs compliant suitable cables solder cup for pre-tinned wire with cross section a wg 26 packing standard 50 pcs in blister weight xx.x g/pc (tbd) draft date approved date rev. engineering change n umber name date t. scheuerlein 22.12.15 t. scheuerlein 08.11.16 50 0 16-0004 m. sch?nsmaul 08.11.16 while the information has been carefully compiled t o the best of our knowledge, nothing is intended as representa tion or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|
